Modal Shaker 100 lbf

Automotive and Aerospace Exciter | Model 2100E11

The Modal Shop 2100E11, a lightweight, electrodynamic modal exciter, is capable of providing 100 lbf (440 N) of peak force excitation in a small footprint weighing just 33 pounds (15 kg). With a 1 in stroke for solid low-frequency performance and useful high-frequency range beyond 5400 Hz, the 2100E11 is suitable for structural testing and experimental modal analysis applications, including single and multiple inputs (SIMO and MIMO) using random, burst random, sine dwell or chirp excitation signals.

CE | UKCA

Highlights

  • Through-hole armature with chuck and collet attachment provides simple set-up with modal stingers
  • Lightweight and portable – weighing just 33 lb (15 kg)
  • Trunnion base provides flexibility when choosing best exciter location(s)
  • 1 in stroke and broad frequency range supply adequate input energy for most modal test applications
  • Forced air cooling sufficient to meet full shaker performance (100 lbf / 440N) specifications

The 2100E11 modal exciter is supplied in a trunnion base allowing full rotation for easy set-up. The through-hole armature design with chuck and collet attachment is ideal for use with either traditional modal stinger rods or piano wire stingers. These stingers greatly simplify test set-up with an easy connection to the force sensor and test structure, helping decouple cross-axis force inputs and minimizing input force measurement errors while using the modal shaker. For horizontal force inputs, the 2100E11 adapts directly to The Modal Shop’s 2050A lateral excitation shaker stand.


Specifications

View Datasheet  |   View Shaker Family Datasheet

 2100E11 ShakerK2100E035 KitK2100E100 Kit
Force Rating – lbf (N)100 (440)35 (156)100 (440)
Max Frequency – Hz [1]5 400
Max Stroke – in (mm) pk-pk1.0 (25)
Shaker Model2100E11
Amplifier Model-2100E21-4002050E18
Accessories Included

[1] Load dependent

Accessories

ModelDescription
Included
HardwareTrunnion base with EasyTurn™ handles
Shaker cable 20 ft
Chuck with collets
10-32 mounting adaptor
Stinger Kits2150G12
2155G12
K2160G
Suggested
PCB 288D01ICP® impedance head driving point sensor
PCB 208PCB 208 series ICP® force sensors
2050ALateral Excitation Stand
2100E13Modal Accessory Kit, for use with 2050A excitation stand

All of The Modal Shop modal shakers are supplied in a trunnion base allowing full rotation for easy set-up. The through-hole armature design with chuck and collet attachment is ideal for use with either traditional modal stinger rods, like the 2150G12 (1/16 in diameter stingers) or piano wire, like the K2160G piano wire stinger kit with force sensor quick disconnect. These stingers greatly simplify test set-up with easy connection to the force sensor and test structure, and help decouple cross-axis force inputs, minimizing or eliminating input force measurement errors. For horizontal force inputs, the modal shakers adapt directly to the 2050A lateral excitation shaker stand, allowing convenient position adjustment over a wide area relative to a test structure.