Array Microphones
Back to Top
130 Series Prepolarized ICP® Array microphones are a cost-effective alternative to precision 377 Series microphones and are suitable for measuring sound within the normal range of the human hearing capability. 130 series of array microphones are single piece units with a built-in preamplifier, and are used in a wide range of applications including holography, sound pressure mapping, noise source identification, beamforming, and other large channel count acoustic tests.
|
 |
130E20
full specs
- 0.25" diameter
- 30-122 dB dynamic range
- 0 V polarization
- 45 mV/Pa sensitivity
- 20-10 kHz frequency range (±2dB), see full specs for more detail
Rental Includes:
Calibration - NIST traceable and ISO 17025/A2LA accredited calibration of microphone and preamplifier pair (TMS: MCS-1 or PCB: ACS-21).
|
Surface Microphones
Back to Top
Recommended for measuring surface pressure and noise measurements in environments where wind is prevalent including wind tunnels, automotive and aircraft wind noise, brake and tire noise, environmental CAT, and more. The flexible design includes a water and dust resistant mesh grid cap, built in preamplifier, and an extremely low profile height.
|
 |
130B40
full specs
- 1.62" diameter with fairing
- 142 dB distortion limit (3%)
- 0 V polarization
- 8.5 mV/Pa sensitivity
- 20-10 kHz frequency range (±3dB), 20-20 kHz frequency range (±6dB)
- 5-ft integral cable terminating in 10-32 plug. Use 070A02 scope adaptor to terminate in BNC, or use 070A05 cable connector to 002C or 003C series cable.
Rental Includes:
Calibration - NIST traceable and ISO 17025/A2LA accredited calibration of microphone and preamplifier pair (TMS: MCS-1 or PCB: ACS-21).
|
Sound Intensity
Back to Top |
 |
Intensity Probe
Larson Davis or GRAS 50AI sound intensity probe complete with probe handle, microphones spacers, and preamplifiers. Various options for remote function capabilities may be available. Contact us for details.
|
 |
MEZZO Intensity Kit
The MEZZO Sound Intensity Probe is an innovative USB intensity probe solution for use with windows based tablets or PCs. The signal processing is embedded in the probe handle itself for easy use with the MEZZO Software. More details here.
|
 |
Intensity Kit
Larson Davis 3000 Analyzer complete with accessories and with GRAS 50AI-LD or LD 2260 intensity probe with remote measurement control capability. Includes probe handle, microphones, spacers, preamplifiers, adaptor cable, and accessories.
|
 |
CAL291
full specs
Larson Davis Residual Intensity Calibrator
|
Hydrophones
Back to Top
RESON piezoelectric underwater sensors for underwater acoustic measurement. Couple with a Larson Davis 831 sound meter or your own analyzer.
|
 |
TC4013
full specs
- Reson high sensitivity broadband miniature hydrophone
- -211 dB ±3 dB receiving sensitivity
- 1 Hz to 170 kHz frequency range
- 700 meter max operating depth
- Standard unit includes 6 m cable terminating in 2-pin LEMO with BNC adaptor
Available Cable Lengths:
TC4013-1 - 6m
TC4013-4 - 10m
TC4013-5 - 20m
TC4013-9 - 60m
TC4013-12 - 100m
|
 |
TC4033
full specs
- Robust Spherical Reference Hydrophone
- -203 dB ±2 dB re 1V/µPa at 250Hz receiving sensitivity
- 1Hz to 140kHz frequency range
- 900 meter max operating depth
- Standard unit includes 10 m cable terminating in BNC connector
Available Cable Lengths:
TC4033-1 - 10m
|
 |
RA0043
Pistonphone coupler for TC4013 hydrophone to 394A40 or 42AA pistonphones
In-field pistonphone calibration is recommended when connecting a hydrophone to a sound meter. A FAQ detailing the process for a Larson Davis 831 is found here
|
 |
EC6061/VP1000
full specs
Teledyne RESON VP1000 Voltage Preamplifier
The VP1000 is a 1MHz bandwidth voltage preamplifier, designed for use with piezoelectric hydrophones. VP1000 offers excellent low-noise performance, gain selection in 6 levels and options of 12 Hi-Pass filters.
Rental Notes:
Rental includes TL 8088 supply cable to universal plugs, 1 m length Requires external 12V power supply, not included
|
 |
EC6081/VP2000
Teledyne RESON VP2000 Voltage Preamplifier
The VP2000 is a 1MHz bandwidth voltage preamplifier, designed for use with piezoelectric hydrophones. VP2000 is similar to the VP1000, but adds 12 low-pass filters ideal for band pass filtering.
Rental Notes:
Rental includes TL 8088 supply cable to universal plugs, 1 m length Requires external 12V power supply, not included
|
High Temperature Acoustics
Back to Top |
 |
Probe Microphone
full specs
PCB model 377B26 or GRAS 40SC probe microphone.
- 2.15 mV/Pa
- 2 Hz - 20 kHz
- 800°C/1472°F max temperature
- 164 dB dynamic range
Rental Includes:
Probe tips -20, 40, 60, 80, 160 mm metal probe tips and 80 mm flexible probe tip
Mounting tools
Calibration Coupler
Previous model - 377A26
Similar models - GRAS 40SC probe microphone
|
 |
HT426E01
full specs
High temperature 1/2" preamplifier for prepolarized microphones. Useable in temperatures up to 120°C/248°F
Rental Includes:
Calibration - NIST traceable and ISO 17025/A2LA accredited calibration of preamplifier (TMS: MCS-13 or PCB: ERC-416).
|
Global Sales Video Newsletters Library About Us 
MTS Sensors Companies - MTS Systems Corporation - PCB Piezotronics - The Modal Shop
