The Modal Shop, Inc. A PCB Group Co.    Global Sales   Video   Newsletters   Library   About Us  
 
Home > Rental > Accelerometer Accessories

Accelerometer Accessories

Coaxial Cables
Back to Top

Select a cable that mates the selected sensor to the signal conditioning or matching hardware. See related accelerometer pages to determine what cable connection mates with each sensor.

Coaxial Cables for Uniaxial Sensors
Series Description Temp Range °F Capacitance Diameter
002 White general purpose PTFE -130 to +400 29pF/ft 0.075in
003 Blue low noise PTFE -320 to +500 30pF/ft 0.079in
012 Black RG58/U -40 to +176 29pF/ft 0.193in
018 Miniature, lightweight, black coaxial -22 to +221 55pF/ft 0.054in
030 Miniature, low-noise, blue coaxial PTFE -130 to +500 30pF/ft 0.042in
Multi Lead Cables for Triaxial Sensors
Series Description Temp Range °F Capacitance Diameter
010 4-conductor, blue coaxial PTFE -130 to +392 26pF/ft 0.1in
034 4-conductor, lightweight, blue coaxial PTFE -130 to +392 25pF/ft 0.077in
078 4-conductor, blue coaxial PTFE -58 to +185 25pF/ft 0.119in
Uniaxial Connector Styles
  10-32 Plug
[EB]
BNC Plug
[AC]
Pigtail Plug
[AD]
  002ACXXXAD
10ft
25ft
3-56 Plug
[EK]
030A10
10ft
 
5-44 Plug
[AG]
003G Series
3ft
10ft
003P30
30ft

018C Series
5ft
20ft
10-32 Plug
[EB]
002A
10ft

003A Series
3ft
10ft
30ft
003C Series
3ft
10ft
20ft
30ft
50ft
100ft-003EB100AC
002C Series
30ft
50ft
BNC Plug
[AC]
  002T Series
3ft
5ft
10ft
20ft
30ft

003D Series
3ft
10ft
20ft
012A Series
3ft
6ft
10ft
25ft
50ft
100ft
MIL-C-5015 Jack
[AE]
  012E20
10ft
20ft
50ft
Triaxial Connector Styles
  4-Pin
Microtech Jack
[CA]
BNC Plug
[AC]
4-Pin Jack (1/4-28)
[CA]
010D Series
10ft
20ft
010G Series
5ft
10ft
20ft
30ft
50ft

078G Series
10ft
20ft
30ft
034G Series
5ft
20ft
30ft
4-Pin Plug (1/4-28)
[AY]
010AYxxxCA
20ft
100ft
 
4-Pin Miniature Jack (8-36)
[HJ]
  034K Series
10ft
20ft
30ft


Cable Adaptors
Back to Top

Select cable adaptors that mates the selected cable to additional cabling or equipment.

070A02

Scope input adaptor, 10-32 jack to BNC plug

070A03

Connector adaptor, 10-32 plug to BNC jack

070A05

Cable feed-thru connector, 10-32 jack to 10-32 jack

070A08

Cable adaptor, 10-32 jack to BNC jack

070A11

BNC ‘T’ connector, 2 BNC jacks, 1 BNC plug

070A12

Coupler, BNC jack to BNC jack

Magnetic Mounting Bases
Back to Top

! Use caution when using magnetic bases, as the installation force can cause excessive shock and damage the sensor.  Install the magnet base on the edge and "roll" the assembly gently into position, or install the magnet base to the test object first and then attach the sensor. 

080A30

080A30
full specs

High strength, rare earth magnetic base, 0.375” hex, 0.23" thick, 2.5lbf, 5-40 tapped hole

080A27

080A27
full specs

High strength, rare earth magnetic base 0.75” hex, 0.27" thick, with 10-32 thread, 12lbf

080A07

080A07

Magnetic base, 1" dia., 0.75" thick, 6lbf, with 10-32 tapped hole

080A130
full specs

Curved surface magnet, 0.75” dia., 0.72" hieght, 15 lbf, SS knurled case, 1/4-28 tapped hole (stud ordered separately)

080A131
full specs

Curved surface magnet, 1.0” dia., 1.02" hieght, 35 lbf, SS knurled case, 1/4-28 tapped hole (stud ordered separately)

080A132

080A132
full specs

Curved surface magnet, 1.5” dia., 1.25" height, 55 lbf, SS knurled case, 1/4-28 tapped hole (stud ordered separately)

Adhesive Mounting Bases
Back to Top

Hardcoated aluminum ground isolating adhesive mounting bases.

080A30

080A

10-32 thread, 0.187” thick, 1/2”hex

080A27

080A15

5-40 thread, 0.125” thick, 5/16”hex

080A07

080A25

5-40 thread, 0.125” thick, 7/16”hex

080A13

10-32 thread, 0.2” thick, 3/4”hex

080A132

080A12

10-32 thread, 0.2” thick, 3/4”hex

080A68

080A68

10-32 thread, 0.2” thick, 7/8”hex

Mounting Studs and Plates
Back to Top

Rental accelerometers include mounting studs as noted on related accelerometer pages. If necessary, select additional mounting studs, adaptor studs, or adaptor plates.

081A27

5-40 to 5-40

081B05

10-32 to 10-32 with shoulder

081B20

1/4-28 to 1/4-28 with shoulder

081A90

5-40 to 10-32

081A08

10-32 to 1/4-28

080A149

10-32 to 1/4-28

9155-MNT05

5-40f to 1/4-28m

9155-MNT32

10-32f to 1/4-28m

9155-MNT07

adhesive to 1/4-28m

Triaxial Mounting Adaptors
Back to Top

Select mounting equipment that mates the selected sensor to the test subject. Where applicable, adhesive bases are included with each sensor rental. 

080B16
full specs

Triaxial mounting adaptor, 0.37” cube, aluminum, for 5-44 mount sensors, mount adaptor via 10-32 tap

080A57
full specs

Triaxial mounting adaptor, 1.5” cube, stainless steel, for 1/4-28 mount sensors, mount adaptor via 10-32 tap

080A204

Triaxial mounting adaptor, 1.23” cube, aluminum, for 10-32 mount sensors, mount adaptor via 10-32 tap

080B55
full specs

Triaxial mounting block, outside mount (for Model 333B)

Easy Mount Clips
full specs

  • 080A152 (for 3701 and 3711 series DC sensors)
  • 080A160 (for 0.55" cube sensors, including 356A02, 356A14, 356A15)
  • 080A172 (for 0.4" cube sensors, including 333B32, 356B11, 356B21)
Additional Accessories
Back to Top

Select additional mounting and removal tools.

039 Series

Avoid sensor damage by using tool and applying shear force, see video. One removal tool is supplied for each model of applicable sensor rented, contact us if additional removal tools are required.

080A109

Petro wax provides a simple mounting method for many applications meeting all of the following conditions:

  • Temperatures below 160°F/70°C
  • Acceleration levels below ±20g
  • Sensors under 40 gram mass
  • Frequencies generally below 3000Hz

One square is 1”x1”x0.25”

080A90

Quick Bond Gel.  Cyanoacrylate-based mounting methods offer an ideal mounting method for lightweight accelerometers (under 20 grams). A fast room temperature cure time coupled with both wide useable frequency and temperature ranges makes this option very popular. Be sure to use a debonder such as acetone and wait a few minutes before removing the sensor.