Sound and Vibration Testing Solutions

Microphones

Microphone Handbook | PCB Piezotronics
Technical Overview and Selection Guide

Microphone and Acoustics Frequently Asked Questions | PCB Piezotronics

Acoustics/Microphones White Papers | PCB Piezotronics

Low Noise Microphone System Model 378A04 | PCB Piezotronics
Measure below 6.5 dBA

1/2" Random Incidence Microphone Model 378A21 | PCB Piezotronics
Measure beyond full human hearing frequency range

1/2" Water and Dust Resistant Free-field Microphone Model 130A24 | PCB Piezotronics
Ruggedized system for tough environments

High Frequency 1/2" Microphone Model 378A06 | PCB Piezotronics
Measure up to 40 kHz

Low Frequency Infrasound Model 378A07 | PCB Piezotronics
Measure down to 0.1 Hz

Surface Microphone Model 130B40 | PCB Piezotronics
For wind-induced noise applications

Microphone Accessories including press-fit clips | PCB Piezotronics
Tripods, clips and more

Noise and Vibration Monitoring

Spartan Noise Dosimeter Model 730 | Larson Davis
Worker Noise Dosimetry Measurements

Environmental Noise Monitoring Systems Series NMS | Larson Davis
For short or permanent noise measurement

Headphone Testing

Research & Development Headphone Test Fixture Model AEC206 | Larson Davis
Binaural Test Fixture

Headphone Test Fixture Model AEC210 | Larson Davis
For Production End-of-Line Testing

Accelerometers

Miniature Triaxial Accelerometers Models 356A01, 356A03 | PCB Piezotronics
1 gram mass triaxial sensors in a variety of ranges

Thru-hole mounted triaxial accelerometers Series 354 | PCB Piezotronics
Easily mount triaxial accelerometers with proper orientation

Shock Triaxial “Pyromid” Accelerometer Series | PCB Piezotronics
Low mass with mechanical isolation and electric filtering

Sensor Easy Mount Clips | PCB Piezotronics
Press fit clips for modal testing and more

Modal Testing

Modal Punch | PCB Piezotronics
Perform structural testing on automotive axles, gearbox shafts, machine tools, and other points inaccessible by standard impact hammers. Use with your own non-instrumented hammer.

Miniature Inertial Shaker System Model 2002E | The Modal Shop

Lateral Excitation Stand Model 2050A | The Modal Shop
Adapt a structural test shaker for horizontal input

AirRide Mount Model 8032S | The Modal Shop
Offers “free-free” support for test structures

Rotational Measurements

LaserTach™ Model LT2 ICP® Tachometer | The Modal Shop
Rotational speed utilizing traditional sensor power

Cable and Sensor Testing Solutions

Cable Test Box Model 400A84 | PCB Piezotronics
Test any 2-conductor cable for faults or opens, and identify issues to inner or outer conductor or shorts. Includes BNC, 10-32, and 5-44 connectors for each cable end; other adaptors can be used.

Accelerometer Simulator Model 4830B | Endevco
Simulate output from voltage or charge mode sensors to troubleshoot test systems

Onsite Calibration

Portable Vibration Calibrators | The Modal Shop
Test accelerometers, velocity sensors, prox probes and more

Digital Sensing

Digital Piezoelectric Accelerometer Model 333D01 | The Modal Shop
Single channel precision sensor with internal data acquisition

Digital Signal Conditioner Model 485B39 | The Modal Shop
2 channels of data conditioning and analysis in your pocket

Rent Solutions

Sound & Vibration Rental Program | The Modal Shop
Continue testing even when budget is tight

Sound & Vibration International Rental Selection Guide | The Modal Shop
See the full list of items available for rent!