The Modal Shop, Inc. A PCB Group Co.    Global Sales   Video   Newsletters   Library   About Us  
 
Home > Rental > General Purpose ICP Pressure

General Purpose ICP Pressure

Piezoelectric pressure sensors are used for a variety of dynamic pressure measurements,such as cavitation, shock and blast waves, or hydraulic and pneumatic pressure fluctuations.

Model Range (psi) Sensitivity (mV/psi) Useful Overrange (psi) Low Freq. Response (Hz) Resolution (mpsi) Acceleration Sensitivity (psi/g) Mass (g)
113B24 1000 5 2000 0.005 5 ≤0.002 6
113B26 500 10 1000 0.01 2 ≤0.002 6
106B50 5 500 - 0.5 0.07 ≤0.002 32
102B06 500 10 1000 0.01 2 ≤0.002 11.6

 

General Purpose
Back to Top

Designed with extremely fast, micro-second response with a wide amplitude and frequency range. These characteristics allow them to excel in high-frequency applications, where minimum sensor diameter is required.  Can be used in applications such as combustion studies, air blast shockwaves, and airbag testing

 

113B24
full specs

  • 1000 psi range
  • 5 mV/psi sensitivity
  • 17-4 Stainless Steel housing
  • 5/16-24 mounting thread
  • 10-32 coaxial jack electrical connector used with 002C or 003C series cables

Rental Includes:
060A03 - 5/16-24-2A thread clamp nut, 1/4" hex, stainless steel
060A05 - M7 x 0.75-6g thread clamp nut
065A02 - Seal ring, sensor flush mount, 0.248" OD x 0.219" ID x 0.015" thk, brass
065A05 - Seal ring, sensor flush mount, 0.248" OD x 0.221" ID x 0.240" thk, 17-4
Calibration - PCB: PCS-1

 

113B26
full specs

  • 500 psi range
  • 10 mV/psi sensitivity
  • 17-4 Stainless Steel housing
  • 5/16-24 mounting thread
  • 10-32 coaxial jack electrical connector used with 002C or 003C series cables

Rental Includes:
060A03 - 5/16-24-2A thread clamp nut, 1/4" hex, stainless steel
060A05 - M7 x 0.75-6g thread clamp nut
065A02 - Seal ring, sensor flush mount, 0.248" OD x 0.219" ID x 0.015" thk, brass
065A05 - Seal ring, sensor flush mount, 0.248" OD x 0.221" ID x 0.240" thk, 17-4
Calibration - PCB: PCS-1

High Sensitivity Dynamic Acoustic Pressure
Back to Top

Series 106 ICP® Dynamic Pressure Sensors measure low-level pressure and high-intensity sound pressure levels, both acoustic and ultrasonic. The 106B50 unit features built-in signal conditioning microelectronics to produce low-impedance voltage output signals. These all-welded, stainless steel units are suited for monitoring pulsations, turbulence, and noise in hydraulic and pneumatic systems.

 

106B50
full specs

  • 5 psi range
  • 500 mV/psi sensitivity
  • 17-4 Stainless Steel housing
  • 3/4-16 mounting thread
  • 10-32 coaxial jack electrical connector used with 002C or 003C series cables

Rental Includes:
060A11 - Acetal clamp nut 3/4-16-2A thd 3/4" hex
060A13 - Metric Acetal clamp nut M20 x 1.5-6g thd 20 mm he
065A36 - Seal, .687" OD x .625" ID x .060", Derlin
Calibration - PCB: PCS-1

High Frequency
Back to Top

Series 102B high frequency dynamic pressure sensors are structured with naturally piezoelectric, stable quartz sensing elements that are well-suited to measure rapidly-changing pressure over wide amplitude and frequency ranges. They feature micro-second response times and high resonant frequency. Solid-state construction, acceleration compensation, hermetically-sealed housings, and laser-welded flush diaphragms provide undistorted high frequency response and durability in adverse environmental conditions. ICP® technology provides a high signal-to-noise ratio and high-level voltage output, capable of driving long cables to a safe zone for data acquisition.

Typical applications include pulses and pressure fluctuations, fluid-borne noise detection, cavitation, high intensity acoustics, closed bomb combustion studies, explosive component performance (e.g. detonators and explosive bolts) and airbag testing. A popular application includes measurement of freefield, enclosed, and directed (shock tube) air blasts resulting from explosions or muzzle blasts.

 

102B06
full specs

  • 500 psi range
  • 10 mV/psi sensitivity
  • Stainless Steel housing
  • 3/8-24 mounting thread
  • 10-32 coaxial jack electrical connector used with 002C or 003C series cables

Rental Includes:
065A03 - Seal ring 0.435" OD x 0.377" ID x 0.030" thk brass
Calibration - PCB: PCS-1

Notes on Calibration
Back to Top

Calibration data is provided electronically (on CD or USB memory stick) or as printed copies, depending on quantity rented and end-user preference.

The Modal Shop has internal calibration intervals set for most test products at 1 year. ANSI/ISO/IEC 17025:2000 makes clear that it is the responsibility of the end-user organization (in this case, the renter) to determine the appropriate calibration interval under the requirements of its own quality system. Per this, calibration certificates of rented equipment have "calibrated on" dates, but blank "calibration due" dates. Rentals ship with a customer specific expected return date in mind - if equipment is expected out for 5 months, the last calibration date will be within the past 7 months. Calibration to additional standards (e.g. Z540 or specific FAA requirements) are possible, but there may be an additional charge.

The Modal Shop's Scope of Accreditation can be found here. An example of a calibrations certificate can be found here. Please contact us with questions or if a different calibration will be needed for your rental sensors.