Rental Products
Power / Signal ConditioningICP® Signal Conditioning Typically used for small channel count (16 channels or less). For larger systems, consider 440 Series.
| |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| 480E09 |
1 |
1x 10x 100x |
0.15Hz |
100kHz |
2 |
yes |
(3) 9V, 40hr |
BNC |
BNC |
General purpose |
| 478A01 |
1 |
1x |
DC |
>10kHz |
8 |
yes |
(3) 9V, 20hr |
4-pin |
BNC |
For 3701 series DC |
| 485B36 |
2 |
1x |
1Hz |
50kHz |
12 |
|
USB port |
BNC |
3.5mm stereo |
Includes cable for RCA/BNC output |
| 482A22 |
4 |
1x |
< 0.1Hz |
>1MHz |
3.25 |
yes |
AC |
BNC |
BNC |
|
| 482A20 |
8 |
1x 10x 100x |
0.22Hz |
100kHz |
25 |
yes |
AC |
BNC |
BNC |
|
| 483A |
12 |
1x |
0.05Hz |
1MHz |
150 |
yes |
AC |
BNC |
BNC |
|
| 483A07 / A17 |
12 |
0-100 (continuous) |
0.3Hz |
150kHz |
150 |
yes |
AC |
BNC |
BNC |
Buffered output |
| 481A01 |
16 |
1x |
0.5Hz |
100kHz |
11 |
yes |
AC |
BNC +50-pin |
BNC |
+ 50-pin input, used w/ 070C29 patch panel system |
| 481A Bundle |
ICP Signal Conditioner, 16-channel, rack mountable, computer controlled, front panel display and control, bundle includes continuous gain control, velocity and displacement output, programmable Elliptical low pass filter, selectable ICP or voltage inputs, BNC inputs/outputs |
440 Series Signal Conditioning
| 441A33 |
PCB 440 Series 3-slot Mainframe Chassis. 1 slot dedicated for power, 2 slots available for signal conditioning |
| 441A39 |
PCB 440 Series Mainframe Chassis. 1 slot dedicated for power, 8 slots available for signal conditioning |
| 441A101 |
AC Power Module for 440 Series power supply chassis |
| 441A102 |
DC Power Module for 440 Series Modular Signal Conditioners |
| 442A117 |
16-channel ICP Sensor Smart Switch Signal Conditioner Module |
| 442A119 |
16-channel ICP module with TEDS capability |
| 442A122 |
16-channel ICP sensor signal conditioner module with x1, x10, x100 gain and TEDS. DB50 input, VXI output connectors, supports find channel and bank switching |
| 442A126 |
16-channel smart switch, ICP sensor signal conditioner module with channel-selectable low pass filter, gain, and TEDS. DB50 input, VXI output connectors, supports find channel and bank switching. |
| 441A175 |
Bank Switch Output Module, facilitates output of multiple 16 channel banks |
| 442A104 |
4-channel ICP sensor signal conditioner module, 4-channel, gain x1, x10, x100, BNC input/output |
| 443A101 |
Dual-Mode vibration amplifier, for conditioning charge and ICP sensors |
| 445A101 |
Capacitive Sensor Signal Conditioner Module. Supplies regulated 18 VDC, adjusts the DC offset voltage, adjustable gain, x1, x10, x100. Output range to ±10 VDC |
| 070M70 |
Charge summing patch panel, 8-input BNC jack, 1-output BNC jack |
Patch Panels Connects sensor cabling to 50-pin for use with 440 or 481 series signal conditioners
| 070C21 |
16-channel Input Patch Panel (3.5"x5.5"x1"), 16 IDC to (1) 50-pin connector |
| 070C29 |
16-channel Input Patch Panel (.5"x7"x1.5"), 16 IDC and 16 BNC to (1) 50-pin connector |
Multichannel Cables
| 009G05 |
Multiconductor input cable, DB-37 pin to 37 pin, 5 ft |
| 009H10 |
Shielded multiconductor ribbon cable, 50 pin to 50 pin connector, 10ft |
| 009H25 |
Shielded multiconductor ribbon cable, 50 pin to 50 pin connector, 25ft |
| 009H100 |
Shielded multiconductor ribbon cable, 50 pin to 50 pin connector, 100ft |
| 009K10 |
DB37 connector to 16 BNC plug, 10 ft |
| 009L05 |
Shielded multiconductor output cable, HP VXI to 4 BNC plugs, 5 ft |
| 009P05 |
Shielded multiconductor output cable, 2 HP VXI to HP compatible DB-50 pin connectors, 5 ft |
| 009S08 |
Shielded multiconductor output cable, HP VXI to HP VXI connectors, 8 ft |
|
