 |
350C02
full specs
50000g shock sensor with internal filters for resonance suppression. Titanium hermetically sealed housing with ¼-28 mounting thread.
Similar to: Kistler 8742A50
|
 |
350B04
full specs
5000g shock in same package size as 350C02, also with internal filtering.
Similar to: Dytran 3200B5/3200B6, Endevco 2255B-1, Kistler 8642A5/8742A5
|
 |
352C23
full specs
Miniature 0.2 gram mass aluminum sensor, 0.7 to 25000Hz at ±3dB. Each rental unit includes 030A10 10ft coaxial cable from 3-56 sensor exit to 10-32 plug. Additionally, each order with any quantity of this model includes a 039A26 removal tool.
Similar to: Dytran 3032A1, Endevco 25B
|
 |
352C22
full specs
Miniature 0.5 gram mass aluminum teardrop, 0.3 to 20000Hz at ±3dB. Each rental unit includes 030A10 10ft coaxial cable from 3-56 sensor exit to 10-32 plug. Additionally, each order with any quantity of this model includes a 039A27 removal tool.
Similar to: B&K 4517, Dytran 3220M6, Endevco 2250A-10, Kistler 87732A500/8778A500
|
 |
352B10
full specs
Small adhesive mount sensor with an integral cable terminating in 10-32 plug.
Similar to: Dytran 3032A/3089A, Vibra-Metrics 9001A
|
 |
353B16
full specs
Miniature 10mV/g single axis accelerometer with 5-44 electrical connector. Adhesive mounting base 080A15 (0.312” hex x 0.125” thick) included with rental. Use with 003G, 003P or 018C style cables, ordered separately.
Similar to: Dytran 3144A
|
 |
353B17
full specs
Miniature accelerometer, similar to 353B18 but with an integral cable terminating in 10-32 plug. Adhesive mounting base 080A15 (0.312” hex x 0.125” thick) included with rental.
Kindof Similar to: Dytran 3035B1, Kistler 8722A500
|
 |
353B18
full specs
General purpose uniaxial ±500g accelerometer, 0.35 to 30000Hz at ±3dB. Adhesive mounting base 080A15 (0.312” hex x 0.125” thick) included with rental.
Similar to: Kistler 8726A500/8730A500
|
 |
353B02
full specs
General purpose 20mV/g. Rentals include ½” hex 080A adhesive mounting base and 081B05 10-32 to 10-32 mounting stud.
Similar to: Wilcoxon 724
|
 |
352C68
full specs
General purpose low mass 100mV/g accelerometer.
Similar to: Endevco 258A-100
|
 |
T333B32
full specs
Specifically designed for modal or structural tests, 100mV/g in a standard adhesive mount titanium cube and tight 5% phase specification from 2-3000. Includes TEDS electronic datasheet.
Similar to: Kistler 8772A50
|
 |
333B
full specs
Specifically designed for modal or structural tests, the 333B offers 100mV/g in a convenient package size from 1-1000Hz (±5%) with tight phase specification. The base is a 3-pin mounting socket, that mates to low cost ribbon cables, one side with the 3-pin plug-in and mounting base, and the other an IDC connector. The IDC connects to multi ribbon cable via 070C29 patch panels, also allowing for distributed sensor deployment which translate to short cable runs.
|
|
T333B
full specs
TEDS-enabled 333B sensor.
|
 |
333B53
full specs
High output 1V/g modal array sensor, includes 081A27 5-40 to 5-40 mounting stud and 080A25 0.438” adhesive base.
Similar to: Dytran 3041A5/3100D24, Kistler 8628B5/8636C5
|
