Rental Products
VXI DigitizersAn industry standard, offering a high-performance system architecture for demanding mechanical, sound and vibration data acquisition applications. Features parallel processing architecture and a dedicated high speed local bus for fast data transfer to the host computer. We offer the E1432A for 16 channel measurements from DC to 20kHz, and the E1433A for 8 channel measurements to 75kHz. Of course, multiple cards can be added to expand to the channel count desired. We also offer breakout boxes that accept voltage inputs or power traditional ICP® transducers.
For a general overview of the hardware, click here:
E1432A, E1433, E1434 Overview
E1432A 16 channel, 51.2kSa/s/channel
The Agilent E1432A 16-Channel 51.2 kSa/s Digitizer plus DSP is a C-size VXI module with a maximum sample rate of 51,200 samples per second per channel. This module includes anti-alias protection, digitization and high speed simultaneous measurement in a single-slot VXI card. Onboard digital signal processing and 32 Mbytes of RAM maximizes total system performance and flexibility. BNC breakout boxes providing ICP® signal conditioning and BNC inputs are available separately, shown below.
Common card options include:
Opt 1D4: Additional Arbitrary Source installed
Opt ANC: 32MB RAM
Opt AYF: Tachometer Input
Opt UGV: Local bus interface installed
Datasheet:
E1433A 8 channel, 196kSa/s/channel
The Agilent E1433A 8-Channel 196 kSa/s Digitizer plus DSP is a C-size VXI module with a maximum sample rate of 196,608 samples per second per channel. This module includes anti-alias protection, digitization and high speed measurement in a single-slot VXI card. Onboard digital signal processing and 32 Mbytes of RAM maximizes total system performance and flexibility. BNC breakout boxes providing ICP® signal conditioning and BNC inputs are available separately, shown below.
Common card options include:
Opt 1D4: Additional Arbitrary Source installed
Opt ANC: 32MB RAM
Opt AYF: Tachometer Input
Opt UGV: Local bus interface installed
Datasheet:
Agilent E1432-61600 8-Channel Voltage Breakout Box with IEPE/ICP® Power Supply
Each of the eight connectors in this type of breakout box is connected to an independent, floating current source. These power integrated-circuit piezoelectric (ICP®) transducers or can be configured to accept voltage inputs. They supply 4.5 mA (nominal) at up to 28 volts. The constant current ICP® power is software controllable in groups of four (i.e., the current sources for connectors 1-4 can be turned on or off as a group, as can the current sources for connectors 5-8).
Each connector on the breakout box has a small manual switch next to it. When this switch is in the “GND” position the outer shell of the connector is grounded to the chassis ground of the VXI mainframe. When it is in the “DIFF” position it is not grounded to the mainframe and will float if not grounded elsewhere in the system (such as at the sensor). The connector shell should not be allowed to float: if the switch is in the “DIFF” position the shell should be grounded elsewhere in the system.
|
