Monitoring Products

VibeAlarm Specifications

Input
Sensor Type	Typically 100 or 500 mV/g ICP® accelerometer (accepts any ICP accelerometer)
Excitation	4 mA
Configuration Control	Setup via RS232, parameters stored in non-volatile memory
Output
Integration	None (acceleration), Single (velocity), Double (displacement)
Units of measure	English or Metric
Display	Dot matrix LCD, 4 digits (floating point) measured value, including units
4-20 mA current loop	Proportional to conditioned, filtered overall level
Raw sensor signal	Buffered output to BNC on front panel
Indicators	Green (OK), Yellow (Alert), Red (Alarm), Green (Sensor Bias)
2 Relays	Alert and alarm closure, solid state 200V, 100mA
Time Delay	10 seconds to 10 minutes
Performance
Measured Range	5V Peak
Band Pass Frequency Range	2 Hz - 20kHz, specified in configuration
Environmental
Temperature	32 - 122°F [0 - 50°C]
Electrical
Power Requirements	22 - 30 VDC, 150 mA
Mechanical
Mounting	DIN Rail
Connections	Screw terminal
Dimensions	70 x 75 x 125 mm
Weight	Approximately 250 grams
Supplied Accessories
PC user interface software on 3.5" floppy disks

Back to VibeAlarm