The Modal Shop, Inc. A PCB Group Co.
    
Home Rental Excitation Electronics Industrial NDT
Satisfaction Guarantee Calibration Accelerometer Calibration System Microphone Calibration System Calibration Services TMS Video Channel Resources
Accelerometer Calibration Workstation
Accelerometer Calibration Workstation
 
Home > Dynamic Calibration Products > 9155 Accelerometer Calibration Specifications

9155 Accelerometer Calibration Specifications

from The Modal Shop

Basic 9155 System Specifications

Frequency Range 5 Hz - 2 kHz with 9155D-875 Shaker Option
  5 Hz - 15 kHz with 9155D-830 Air-Bearing Shaker Option
  5 Hz - 20 kHz with 9155D-831 Air-Bearing Shaker Option
  0.5 Hz - 500 Hz with 9155D-771 Low Frequency Shaker Option
  0.1 Hz - 500 Hz with 9155D-779 Low Frequency Shaker Option
Typical Measurement Uncertainty1, 2 2.0% (5-10 Hz)
  1.2% (10-100 Hz)
  0.8% (100 Hz)
  1.0% (100 - 1,000 Hz)
  1.4% (1,000 - 5,000 Hz)
  1.9% (5,000 - 10,000 Hz)
  2.2% (10,000-15,000 Hz)
  2.8% (15,000-20,000 Hz)
Calibration Method Back-to-back comparison per ISO 16063-21
Measurements Sensitivity, Amplitude, Phase, Bias, Resonance5, Linearity5, Shock5, Shunt5, DC Offset, Bridge Resistance, DC Sensitivity
Accelerometers Supported ICP®, Charge, Voltage, Capacitive3, Piezoresistive4, CVLD
Sensors Supported Acceleration, Velocity5
TEDS Sensor Support IEEE 1451.45, IEEE P1451.45
Excitation Type Stepped Sine, Multi-sine
Acceleration Levels6 0.1 to 10 gpk
Calibration Data Management Yes
Automatic pass/fail Classification Yes
Measurement Units English, Metric
Input Power 100-120V or 220-240V at 48 to 62 Hz
Calibration Run Time <90 seconds7

1 Random component estimates significantly affected by shaker selection and environmental conditions
2 Best measurement uncertainty available with option 9155D-C83XP
3 Capacitive sensors supported in base s/w.  Capacitive sensor signal conditioning available as 9155D-445 option
4 Piezoresistive sensors supported in base s/w.  Signal conditioning available as 9155D-478 option
5 Optional features
6 Shaker dependent, limited by stroke and load capacity
7 10 Hz to 20 kHz at 1/3 octaves


Accessories Included

  • PC with Printer
  • 9155 Calibration Software (see Software Features)
  • Data Acquisition Hardware
  • Database Software
  • System Verification Sensor
  • Various Mounting Adaptors and Cables
  • Uncertainty Budget Procedures
  • On-Site Installation and Training

Return to Accelerometer Calibration Workstation Model 9155D page


Return to Calibration Home page

PCB PCB Group Companies  -  PCB Piezotronics  -  The Modal Shop  -  Larson Davis
SimuTech Group  -  PCB Load & Torque
513.351.9919 800.860.4867 info@modalshop.com
Privacy Statement | Terms of Use

© 2014 The Modal Shop, Inc.

PCB and ICP are registered trademarks of PCB Group, Inc.

Global Sales | Contact TMS